Lowrider 2 Build in Louisville, Kentucky

New Home Forum LowRider Your Builds – LowRider Lowrider 2 Build in Louisville, Kentucky

Tagged: 

This topic contains 12 replies, has 6 voices, and was last updated by  Jeffeb3 2 weeks, 2 days ago.

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #108038

    Oscar Salcedo
    Participant

    Hi everyone,

    I have finally decided to go ahead and start building my Lowrider 2. Kit has been ordered and parts printed!

    I have set these as goals for my build:

    • 8ft. x 4ft. cutting surface
    • Cutting + Laser Engraving (maybe cutting 1/8″ acrylics?)
    • Dust Collection

    Next steps:

    • Get a router
    • Build a table
    • Cut the flat parts

    Printing took a while, and I planned my filament stock poorly:

    IMG_8848

    I may have also gone a bit overboard with the brim:

    IMG_0466

    And I got lucky a couple of times before I ran out of filament:

    IMG_0490

    Looking forward to getting the parts and starting to put it all together!

     

    Cheers!

    #108051

    Ryan
    Keymaster

    Fun colors = fun machine!

    1 user thanked author for this post.
    #108072

    Oscar Salcedo
    Participant

    Can someone look at my printed parts picture and tell me if I am missing anything? I was browsing around and saw someone had 4 of the XZ_Side_Belt printed? I only have 2 printed…

     

    Untitled

    Thanks!

    Attachments:
    #108100

    Ryan
    Keymaster

    Most of it is there, missing some LCD parts, but the XZ you have is correct.

    1 user thanked author for this post.
    #108114

    Oscar Salcedo
    Participant

    Thanks Ryan. I do have the LCD case and clip printed now. Phew! I thought I had messed up the prints

    Cheers!

    #108231

    TJ
    Participant

    Great to see another Kentucky build. I searched “Kentucky” a few days ago on this forum and all I found were references to the derby and to KFC. Now we’ve got two builds the same week!

    #108277

    Oscar Salcedo
    Participant

    Ha! I did the same thing TJ!

    Whereabouts in KY are you? I am sure it won’t hurt to have another local builder to bounce ideas off of.

    Cheers!

    #108302

    Oscar Salcedo
    Participant

    Parts came in today!

    IMG_0703

    Great packaging:

    IMG_0705
    IMG_0706-1
    Checked thoroughly, everything is in there!

    IMG_0710-1

    And the building begins (pending tightening everything up)!

    IMG_0711-1
    IMG_0712-1

    Cheers!

    #108371

    Jamie
    Participant

    Happy for you, but sheesh, I heard you the first four times 😉

    Maybe close your browser and reopen? Is it possible a misplaced refresh or ‘back’ button can duplicate posts?

    For reference https://en.m.wikipedia.org/wiki/Post/Redirect/Get

    #108392

    TJ
    Participant

    Im in Danville, about an hour south of Lexington. Good luck getting up and running.

    #108475

    Oscar Salcedo
    Participant

    Happy for you, but sheesh, I heard you the first four times 😉

    Maybe close your browser and reopen? Is it possible a misplaced refresh or ‘back’ button can duplicate posts?

    For reference https://en.m.wikipedia.org/wiki/Post/Redirect/Get

    Boy that was not what I meant to do! I kept getting a 505 error when posting, so I left it alone. When I got back all the posts were there! Heck, that picture of the 6 pack holder is not even mine, how’d that get in there? LOL
    Is there an Admin around who can delete the dups? I went to my profile –> Activity and delete the posts there, but they are still showing!

    Cheers!

    #108508

    Barry
    Participant

    I found a while back that if you upload a picture that has the same name as another picture that’s already been uploaded, it will ignore the new one and use the previous one.

    #108528

    Jeffeb3
    Participant

    The 505 means it sort-a worked. You have to reload the page to see what it decided to post.

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.