Lowrider 2 Build in Basque Country

New Home Forum LowRider Your Builds – LowRider Lowrider 2 Build in Basque Country

This topic contains 6 replies, has 2 voices, and was last updated by  Inaki OE 1 week, 3 days ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #103536

    Inaki OE
    Participant

    Hi all,

    First of all thanks Ryan for the design of the LR2, I’m very excited about this project and the posibilites of having a CNC at last. Indeed, this is my first important project in my workshop, and I have to tell you that I’m a little bit nervous whit this project.

    I have every part ready to the assembly process, and I hope to have the LR2 ready in few weeks. My idea is to send to this forum pictures of my steps, and maybe with time, of my designs in wood.

    Thanks again!

    Cheers.

    Iñaki.

    1 user thanked author for this post.
    #103546

    Ryan
    Keymaster

    Sweet!

     

    If that is steel lined belt do not use it, get the right stuff.

    1 user thanked author for this post.
    #103630

    Inaki OE
    Participant

    I thought they would work the same way… I’ve already bought the correct belts. Thanks for the warning!

    1 user thanked author for this post.
    #104199

    Inaki OE
    Participant

    Hi all,

    the Low Rider 2 is assembled and waiting for the new Mini-Rambo to make the first tests. I am very happy with how it slides, it is a really great design!

     

     

    1 user thanked author for this post.
    #104238

    Ryan
    Keymaster

    You might want to come up with some sort of strap to keep the yplates and Z axis together while hanging, you might have already killed those couplers. The springs will really perform poorly during a cut.

    1 user thanked author for this post.
    #104260

    Inaki OE
    Participant

    Thanks for the advice Ryan! Yes, I will use two straps to hold those parts together. And, just in case, I bought a couple more of couplers.

    Next weekend the first tests! well, at least I hope so…

     

    #105313

    Inaki OE
    Participant

    At last! the new board Mini-Rambo works fine. I’m looking forward to make designs and cut woods!

     

    2 users thanked author for this post.
Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.