July 10, 2017 at 11:19 am #37936
I have ordered the3.8 Watt from J tech https://jtechphotonics.com/?product=3-8w-laser-and-2-5amp-safety-compliant-driver-kit
I was wondering if any one has 3D printed out a good tool mount?
I want to engrave on mirrors does anyone have a good source for mirror that work well at a reasonable price?
Thanks for any help RenzJuly 10, 2017 at 12:00 pm #37937
Did you read @jason‘s Laser Engraving post: https://www.v1engineering.com/forum/topic/engraved-mirror-logos/ . He would be the one to ask about mirrors and such. Haven’t seen him around recently, so you might have to ping him.July 10, 2017 at 12:39 pm #37938
Will ping I have indeed read that thread many times. But no specifics on those 2 questions thanks for the info i appreciate it I need all the help I can LOLJuly 11, 2017 at 1:16 pm #37992
Can any one tell me if this Laser tool mount will fit on the new Gantry tool mount the curved one?
This is the one is the the mount on thingiverse
Or maybe there is no way to quick change between the Laser and the Dewalt 660?
Edit screwed up the linksJuly 11, 2017 at 1:34 pm #38003
That will not fit, the current mounts usually have 525 in the title or description.July 18, 2017 at 7:47 am #38688
I printed out this one from thingiverse
I really like the laser sights to help with placement, and it works with the stock mount.July 18, 2017 at 10:23 am #38696
I really like one especially running the small diodes on a CR2032 Battery! Thanks
You must be logged in to reply to this topic.