Joker inspired MP3DP

This topic contains 216 replies, has 8 voices, and was last updated by  Jeffeb3 1 year, 10 months ago.

Viewing 30 posts - 31 through 60 (of 217 total)
  • Author
    Posts
  • #36226

    Jeffeb3
    Participant

    Whew, that was close. Glad nothing was destroyed.

    #36227

    Ryan
    Keymaster

    Stop! You still need to set the driver voltages or they will probably be to high as well. You can get the values in the advanced config form the other firmwares but you need to set it to whatever steppers you are using.

    Wow, I think you got lucky there! It does the same thing if you load rambo onto the ramps it kicks on the bed and fan mosfets at boot.

    I guess I need to upload a minirambo firmware.

    #36228

    Mmmfishtacos
    Participant

    Stop! You still need to set the driver voltages or they will probably be to high as well. You can get the values in the advanced config form the other firmwares but you need to set it to whatever steppers you are using.

    Wow, I think you got lucky there! It does the same thing if you load rambo onto the ramps it kicks on the bed and fan mosfets at boot.

    I guess I need to upload a minirambo firmware.

    Yeah, I stopped. Once I got it to load and not go nuclear I just shut if off. Where do I find the value for my steppers?

    #36229

    Ryan
    Keymaster

    I have the math here,

    https://www.v1engineering.com/forum/topic/some-updates-marlin-update-new-boards/#post-31045

    The values can now be set in configuration-adv.h now instead of the rambo tab.

    #36230

    Mmmfishtacos
    Participant

    Okay, so mine are 1.5A. So i shpuldnt need to vhange anything right?

    #36231

    Ryan
    Keymaster

    Yes you need to set them, if you are using my ramps firmware the values have not been changed.

    Let me finish my breakfast and I can upload it for you.

    1 user thanked author for this post.
    #36237

    Ryan
    Keymaster

    Okay try it out and let me know if there are any issues.

    Project – 3D Printer

    #36243

    Mmmfishtacos
    Participant

    Thanks, I’ll get to it later tonight after dinner.

    Got a fan printing now. The shell function in fusion can be a pain. I had a much better design that what I’m printing now, it just wouldn’t shell it. So it’s pretty basic, I’m sure i’ll get a lot of blow back. As long as it get’s enough air to the part it will be okay.

    #36255

    Mmmfishtacos
    Participant

    It loaded fine. Now I just need to get it properly wired.

    #36256

    Mmmfishtacos
    Participant

    Well, x and y only move one way. Z moves up but will move back down to where it started by not go lower than that.

    #36257

    Ryan
    Keymaster

    Are you endstops wired NC?

    #36258

    Mmmfishtacos
    Participant

    Right now they are wired – and S, on the end stop one middle and out.

    #36259

    Mmmfishtacos
    Participant

    Just switched on to the way I had it before. It’s working. I’ll change the rest

    #36260

    Ryan
    Keymaster

    Look at the side of the endstop. You want C and NC, Common and Normally Closed.

    You have it Normally open the printer thinks it is hitting the endstops.

    1 user thanked author for this post.
    #36264

    Mmmfishtacos
    Participant

    Yeah, that’s the way I had/have them. It seems to work now only After I hit auto home. IF i start the machine and try to move it it wont go past the + o. I think it’s thinking that is home.

    #36265

    Ryan
    Keymaster

    Negative movements are turned off on printers for safety.

    #36266

    Mmmfishtacos
    Participant

    Makes sense, I just don’t remember the other machine doing that. Although I haven’t run it from the LCD in a long time.

    Well here’s the photo of the fan, I’m not sure how well it’s going to work. I tired modifying it some more but fusion is locking up on me every time I start a new sketch…

    The print came out pretty badly. I was too close the bed and it shows there on the front of the fan..

    #36273

    Barry
    Participant

    Cool! I really wish the E3d hot end condoms lasted longer. After a while the silicone starts to crumble from the heat. They work really well other than that. I get maybe 2 rolls of petg with one.

    #36588

    Mmmfishtacos
    Participant

    Can anyone recommend the bl touch?

    #36722

    Mmmfishtacos
    Participant

    My first shot at a mini Rambo mount. I plan to add on to this. But it works for now. Just had to get something down to get an Idea moving.

    #36727

    Ryan
    Keymaster

    Awesome, that corner that is sticking out is the part that gets hot. Good choice of orientation.

    How are you liking it? I am just about over dealing with the ramps, the rambos have been so flawless they are by far worth the extra money, and that archim board works great now as well. There was one little issue they fixed it and updated the firmware the next day!

    Looking at your build, you might want to try one of the berd air systems to get rid of the giant fan. It is a bit noisy but seems to work perfect. Never thought of it before but maybe putting the air pump in a insulated box would cut down the noise.

    #36733

    Mmmfishtacos
    Participant

    I havent got to do much with it. Had to take a break from everything for awhile. Got my orders out and stopped advertising. I made some adjustments to my product design and with that zebra plate ive come up with something im finally happy with. So happy that I went ahead and threw away the 30 or so that I had printed up.

    By the way that zebra plate is pretty sweet
    But to Z can be pretty inconsistent when you take it on and off I found myself constantly adjusting it. And that’s why I was asking about the BL touch.

    I’ve been meaning to ask you the name of that air system again so I can look into getting one because I was the first thing I thought of when I saw the big fan. I’ll probably end up buying one.

    #36734

    Mmmfishtacos
    Participant

    Ordered a berd air kit.

    #36760

    Ryan
    Keymaster

    Nice I can’t wait to hear your impressions of it.

    I guess I am going to have to look into the recent improvements into bed leveling. I really haven’t tried any of it in a long time. I did mess with a Taz a while ago and the system they have seemed to work great.

    #36806

    Mmmfishtacos
    Participant

    It couldn’t hurt as long as you were using it in conjunction with normal bedleveing. Although Pursa gets away without any manual bedleveing win at all.

    #36810

    Jeffeb3
    Participant

    Prusa takes it a step further, because they sense the rotation of the Y relative to X, which is pretty cool, but never been a problem for me.

    #36827

    Mmmfishtacos
    Participant

    Dang, orderer this morning and theyve already shipped it.

    #37019

    Mmmfishtacos
    Participant

    Okay try it out and let me know if there are any issues.

    Project – 3D Printer

    <iframe class=”wp-embedded-content” sandbox=”allow-scripts” security=”restricted” style=”position: absolute; clip: rect(1px, 1px, 1px, 1px);” src=”https://www.v1engineering.com/projects/project-3d-printer/embed/#?secret=o8Mv9uSQvg” data-secret=”o8Mv9uSQvg” width=”600″ height=”338″ title=”“Project – 3D Printer” — Vicious Circle CNC” frameborder=”0″ marginwidth=”0″ marginheight=”0″ scrolling=”no”></iframe>

    It seems this page is down. I was going to flash my original machine with the new firmware. As I’m still on the old one.

    #37020

    Ryan
    Keymaster

    I think it’s good now, try a refresh f5.

    1 user thanked author for this post.
    #37040

    Mmmfishtacos
    Participant

    Well im giving the bltouch a shot.

Viewing 30 posts - 31 through 60 (of 217 total)

You must be logged in to reply to this topic.