Jewelry box built video

New Home Forum Things You Have Made Jewelry box built video

This topic contains 4 replies, has 4 voices, and was last updated by  Alex 2 weeks, 3 days ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #115710

    Alex
    Participant

    I should remember to never use plywood for the project like that 🙂

    But then I wasted so much of it through learning attempts.

    • This topic was modified 3 weeks, 1 day ago by  Alex.
    • This topic was modified 3 weeks, 1 day ago by  Ryan. Reason: fixed vid link, just plain url
    Attachments:
    4 users thanked author for this post.
    #115716

    Ryan
    Keymaster

    NICE! Wow, unique, looks great.

    #115722

    Clay
    Participant

    Was just about to start designing a jewelry box with a center pivot point very similar to this. The shape is very unique, cool design.

    You should upload your fusion files or a DXF so that others can make it!

    Great job!

    #116002

    Dui, ni shuo de dui
    Participant

    Awesome work.

    I suggest you to put some little pins under each tray, that way they will open up the next one automatically, you’ll just have to twist the whole thing to get everything opened and equally spaced.

    #116365

    Alex
    Participant

    Clay, I’m usually sharing all 3D models made via Thingiverse, however in this case I was replicating someone else’s work and am on the border if sharing model would be ethical.

     

    Dui, great idea, I’ll hold off changing this build, may incorporate it into next attempt.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.