iTopia's Lowrider 122x61cm (Holland)

New Home Forum LowRider Your Builds – LowRider iTopia's Lowrider 122x61cm (Holland)

This topic contains 3 replies, has 2 voices, and was last updated by  Ryan 1 year, 9 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #50439


    I Started my lowrider build on 11 November 2017. I converted the bolt and nuts to the most compatible of the metric system. This worked out very well so far:

    BOLT 5_16 x 5 => M8 x 130
    BOLT 5_16 x 4 => M8 x 100
    BOLT 5_16 x 1.75 => M8 x 45
    BOLT 5_16 x 1.25 => M8 x 30
    locknut 5_16 => M8
    SCREW 6_32 x1 => M4 x 25
    SCREW 6_32 x .75 => M4 x 20
    LOCK NUT 6_32 => M4

    The M3,5 is close to the 6_32, but that is not good available so ended up with M4 and making the holes bigger.

    The 1 inch tubes, I found at a custom bikershop in Holland (The Hage).



    Cool, very few international LowRider CNC builds.

    I have added your conversions to the parts page, thanks for taking the time to share them.



    I changed the lead screw for an piece of M8 and redesigned the printed part. This way the Z-axes have less trouble keeping the things in place because the pitch of M8 is lower.



    It must be right on the edge, here the 5/16″ would not work well. It would bind randomly. The T8’s haven’t failed me so far.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.