It Lives!!!

This topic contains 5 replies, has 3 voices, and was last updated by  Olivier Belisle 2 weeks, 5 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #97846

    Gary
    Participant

    Hi,

    My MPCNC survived it’s first power up and after switching the stepper wires around everything is moving in the right direction and the end stops are doing what they should…Control is working vi both PC and graphic board.

    A fairly standard build with a work area 2 feet by 2 feet by 4 inches. Have mounted it on a solid bench I made of 2 x 4’s.  Will spend today working through getting it to draw the crown.

    Still have to tidy wiring, print a case for the Rambo board, the work through offsets for the end stops.

    Pics to follow..

    cheers

    Gary

    Australia

    1 user thanked author for this post.
    #97884

    Gary
    Participant

    First Crown test attached – couple of smudges from the cheap pen – not the MPCNC’s fault…

    Gary

    Australia

    #97885

    Gary
    Participant

    File attached here

    • This reply was modified 4 weeks ago by  Gary.
    Attachments:
    #97980

    Ryan
    Keymaster

    Welcome to the Crew, that makes it official.

    #99002

    Gary
    Participant

    Pic attached – just waiting for dome stretchy covers to arrive to neaten the wiring…

    Gary

     

    • This reply was modified 2 weeks, 6 days ago by  Gary.
    Attachments:
    #99189

    Olivier Belisle
    Participant

    I like the fact that you let space on your table for the controller and eventually a laptop 😛

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.