Help with first crown test

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Help with first crown test

This topic contains 2 replies, has 2 voices, and was last updated by  Tony DAngelo 1 month, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #111482

    Tony DAngelo

    Hi guys

    This is my first crown test.

    I can reproduce this plot with the same results so I know my pen and media are not the issue.

    I got the g code by copy & paste from the V1 web page in to note pad ++

    please have a look at the jpg file and tell me what you think.

    I am sure it’s just some adjustments that are needed.

    Thanks in advance





    Looks like mild backlash. The most common cause is pulleys that are loose on the motor shafts or loose belts. Check that first.

    2 users thanked author for this post.

    Tony DAngelo

    well it’s almost there, still have a problem with the circle not closing, and slight broken line. see pic.


Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.