February 19, 2017 at 1:32 pm #27920
I have finally got it mounted. hopefully tomorrow I will have it rolling under its own power.
Attachments:February 19, 2017 at 1:37 pm #27925
On the lower rollers the bolts look short, did I screw that up or did you just have some shorty bolts? Sorry I am nervous as these builds are getting close to completion the errors could start showing up.February 19, 2017 at 2:05 pm #27927
I used all the bolt dimensions you recommended. I used 3/8inch ply. So I feel that is why they are short. I did end up using more 6/32 1 inch rather than 3/4. Even after counter sinking they were short. I still ned to replace some of the 3/4 inch. You can see 1inch on the X. 3/4 on the Z. and 1 inch through the Z/M corner I feel they are too short.
Attachments:February 19, 2017 at 2:08 pm #27930
Okay the 3/8 explains it.February 19, 2017 at 4:54 pm #27947
Nice! You are probably the closest to being finished with the lowrider build!February 21, 2017 at 2:41 pm #28122February 21, 2017 at 2:55 pm #28124
PLease please please drop that on youtube. That is the only way I can add it to the playlist. So stoked, Proof it actually works!February 21, 2017 at 3:21 pm #28127
That’s freaking awesome!February 21, 2017 at 5:34 pm #28130
Congratulations! When we will see it in action?February 21, 2017 at 5:51 pm #28131
Will this work.
I need a bigger garage. Hopefully I will do some cutting real soon..February 22, 2017 at 4:16 pm #28216February 22, 2017 at 4:19 pm #28217
OMG!!!!!February 22, 2017 at 4:27 pm #28218
So I need to get some wire management shots for you but I have everything in between the panels and out the bottom into the ramps, and the power supply brick fits in there as well on top of the adjustable roller.
Nothing against what you have there just how I do it.
So stoked I’m texting it to all my friends and fam.February 22, 2017 at 5:32 pm #28219
Good job!February 22, 2017 at 6:28 pm #28226
Dui, ni shuo de duiParticipant
How do you ensure your table stays flat everywhere?February 23, 2017 at 4:49 am #28249
You must be logged in to reply to this topic.