- November 21, 2017 at 3:27 pm #48220
I’ve been getting my tools out of drawers, and onto the wall, but I have a bunch of stuff I’m calling “Hardware”. Stuff like screws, hinges, bolts, nuts, all that stuff.
I see this solution:
It’s based off of bins like these:
I like that idea, but the bins are only 13″ deep, and where I’m putting this, I have plenty of depth, so I thought I would also build some bigger doors to hang some more stuff on them. I could hang on the front or back of the doors, and I would make sure they were things I could secure very well, so they wouldn’t fly off when I opened the doors. I’m going to make the door frames out of 2by material, and the rest would be panels. I’m toying with the idea of making the door fronts that wall paneling, but they need to stay stable to racking.
Anyway, here’s the design, WDYT?
The Blue is 3/4″ ply. The Purple is 2by material, the cyan is either panels or the blue wall panel stuff I have a bunch of. The blocks on the bottom are casters (I’m not drawing up casters, you’re nuts). The black boxes are the storage boxes. I will cut into the 3/4″ ply about 3/16″ to make gaps for some hardboard supports for the boxes, and if I want a bigger area, I just won’t install a shelf there.
Any other tips/suggestions?November 21, 2017 at 3:28 pm #48221November 21, 2017 at 3:33 pm #48226
The other thing I was thinking about is, how to join everything. Should I make tabs on the sides and the middle piece, and then cut grooves in the top/bottom?
Should I carve something into the door fronts?November 21, 2017 at 4:28 pm #48235
I’d probably put in horizontal pieces to join to the center vertical one to provide some horizontal stability to help keep the sides from spreading in the front (I’m reminded of tall network racks that have a horizontal piece about midway up). Are you planning on using the recessed sides to hang things outside the cabinet?November 21, 2017 at 4:35 pm #48237
Love me some good organization.
The middle catches my eye as well, either a stationary center piece or a thicker center piece. Either one probably would be a bit more safe.
Have a look at some of Adam Savage’s shop vids I am pretty sure he has something similar, might give you some ideas.November 21, 2017 at 10:15 pm #48246
I went by HF after work today and got a couple of the organizers. They are larger than I thought.
I have a similar box made from 3/4″ plywood with shelves that slide into different positions and it is rock solid. This isn’t sheet metal, so I don’t think it will bow out, especially because of those 2bys supporting the door hinges. And I made for a full thickness 3/4″ back panel, which is overkill.
I might be convinced to make the middle double thickness, just so I can make the dados for the shelves deeper and not end up with 1 ply in the middle.
The video I linked (or maybe it was another one) linked Adam savages similar build. His is 6′ tall or so and uses $90 bins (must be nice). They are Sortimo brand.
This actually feels like one of those great arbitrage situations. I wonder how much I could get for this, with the bins on Craiglist. Some of those rolling steel carts don’t have this much storage and cost a bunch… I should slow down and see if I actually make one for myself.
I’m going to get better measurements of the box and decide what kind of shelf system to do next.
– Skinny dados with removable skinny shelves.
– 3/4″ dados, with just 1″ slats glued in on either side.
– attach 3/4″x3/4″ slats we screws and glue, but without any dadosNovember 21, 2017 at 10:16 pm #48247
I don’t think I’ll hang anything on the sides, because I have another cabinet on one side, and the low rider on the other. But maybe in it’s next life.November 22, 2017 at 4:55 am #48254
Speaking of Sortimo, have you seen the new Milwaukee small parts organizers?November 22, 2017 at 8:03 am #48264
This is the sortimo video:
Those milwaukee bins look nice, but $45 each. I can’t spend more on my bins than the screws inside. Maybe if I was going on location somewhere, or I had some really nice tools in them (I don’t think I own any really nice tools).
Although, I may have to do some more planning, because these things are much bigger than I thought. I’m not sure I need 20 of them.November 22, 2017 at 8:05 am #48266
This is maybe more in my price range:
I’ll have to put some parts in these HF bins and see if I can tolerate them. Even the $5 difference is 50% more expensive.November 22, 2017 at 8:06 am #48268
That’s interesting. The video doesn’t embed unless it’s on it’s own line. Makes sense, I guess.November 22, 2017 at 9:44 am #48285
I really like the idea of being able to take out a little box from inside like the HF ones you linked. If they don’t suck that would be a win.
I have a bunch of clear tackle box style boxes for all the reprap type parts I have been acquiring over time. lots of hardware. I might have to give something like this a try. I just use stacks on the NSF racks but now maybe your sortimo so I don’t have to do the box shuffle when I want to get at the one on the bottom of the stack.November 22, 2017 at 3:32 pm #48314
OK, they kind of suck… They are OK. The sizes are reasonable. The boxes stay put a little when they aren’t surrounded.
But, they certainly aren’t going to survive if I grab the handle and carry it like a briefcase, the top doesn’t seal that well.
The boxes on the smallest container fit in the medium one, and visa versa, but they are 5mm difference in height, which is definitely weird.
Some of the boxes missed the lid, where it tries to grab them, so they are curved inward.
I bought two large, two medium, and two small. I like the small ones the best, and then the medium. I don’t think I’ll ever fill the two large, unless I put stuff like sprinkler valves in there or something.
I might look around for some better, more plano tackle box looking things, but they would still need to be cheap. I think these will work, but they are not great. If I was getting into them everyday, I would get frustrated quickly.
Here is a pic of my power tool storage shelving. The shelves are loose. They just friction fit in place:November 22, 2017 at 3:35 pm #48315
The plano boxes definitely wouldn’t let me just bring a bunch of screws with me to do a project. That’s a good point, Ryan. Maybe I’ll look at HD later and see if they have anything better in a husky or something. That DeWalt one I posted only has bins of one size, which seems like a poor decision. If only I had some way to create objects out of plastic my pushing strings of plastic through a heated nozzle…November 22, 2017 at 3:42 pm #48318
This is giving me some good idea’s I have a small gorilla rack in the garage but a few of these would be nice maybe made out of the two halves of the rack with some sides on it. As soon as I get the new printer finalized I really want to have a go at the LowRider and that means shop storage. This thread came at a great time.
I’ve been sick for exactly one month today, I hope this mornings blood tests are a little better than last time I really need to get some sh*t done. Getting antsy to go clean up the shop and make some improvements.November 22, 2017 at 5:45 pm #48323
I made two of those shelf things. I got the idea from a shop notes. I made them a bit short, so I could put casters or a toe kick.November 22, 2017 at 6:08 pm #48324
BarryParticipantThis is maybe more in my price range: https://www.homedepot.com/p/DEWALT-20-Compartment-Pro-Small-Parts-Organizer-DWST14830/301869332?MERCH=REC-_-PIPHorizontal1_rr-_-303005741-_-301869332-_-N I’ll have to put some parts in these HF bins and see if I can tolerate them. Even the $5 difference is 50% more expensive.
Stay away from those! I have some of the next size down. The clear plastic locking tabs will break after a few uses. They have a version with metal locking tabs, might be better.November 24, 2017 at 8:46 am #48405
Hmmm. These are pretty tempting. They don’t have removable bins, but if you can flip them without the screws flying into neighboring bins, then they will be worth it vs. the HF ones:
The plastic might break, but I’m not taking these in the car or anything, I’m just storing screws in the garage.November 24, 2017 at 8:54 am #48406
2/$10! locks on all sides, good. Only 1/2 adjustable, not bad, might even be a plus.
Looking at my Plano style boxes I am glad they are smaller the one I have the Bolts in is pretty heavy, much bigger and I would never expect a latch to hold them in. Your adjustable cabinet seems better and better. I have a bunch of tools in plastic carry boxes various plastic bins but really they are fairly similar. I think If I make one I might make one side narrower than the other for small boxes and the other side for tool boxes and larger bins.
I think I am getting at one size fits all and an Adam savage style storage with 100 of the exact same bins isn’t for me. I would prefer all the bins to be a little different so I don’t need to read labels to find the right one at a glance.November 24, 2017 at 9:15 am #48408
Yeah. Those are some good points. I highly doubt I will use 20 of them.November 24, 2017 at 10:59 am #48409
I bought some of the hd ones. They are much better at sealing the top. The adjustable sections specifically are pretty poor at sealing the bottoms though, especially when open. To combat that, I could just put small stuff in smaller bins. But I think I will try printing some smaller cups to fit into the non adjustable parts for small nails and things. Hard to beat $50 for 10x.
I will say that the removable cups are pretty nice on the HF ones. Specifically, they are way better for reorganizing the bins. Resorting these HD ones is going to be a pain. The HF ones are bigger too. HF also has deeper ones that have the same footprint. The lids just don’t seat well.
So neither one is perfect. That’s ok for my hardware, but if I was an electrician and trying to organize my parts, I’d go with something better.
I’m going to collect all my parts and see if I can collect them into 10 pretty easily. If not, I might redesign for 20 or for 10 + a Plano-type side.December 5, 2017 at 9:51 am #49170
I use the HDX ones for my screws and printer parts. They’ve been great, I’ve never had issues with parts migrating and they are set upside down as often as right side up.December 5, 2017 at 10:34 am #49180
They seem good. I ended up buying 8 2x packs, and I’ve already filled a bunch of them. I want some kind of solution for even smaller quantities. I was going to whip up a simple box to print to make the smallest sections 1/2 or 1/4 sized, but the lid isn’t flat in the middle of the boxes, so I’m stuck there.
At some point, I will have so many scews, I won’t be able to find them if I have them. Sort of the law of conservation of trouble I guess.
I definitely want to get this thing built soon though. I feel like the hardware is trapped under a bunch of boxes. I keep thinking of other details though, and it’s getting crazy.
– I was thinking about a solid workbench top (I don’t need that here)
– I was thinking of using more shelves for some power tool storage, since it can be locked easier
– I was thinking about maybe adding one drawer to the top for the most used screws (I use 1 1/4″ wood screws for everything, except 2by’s then I use the 2 1/4 size ones). I have this idea that I’ll use the rawest, roughest 2×4 for the drawer front (as a statement for all those WWers that use ancient, air-dried, blessed mahogany from the titanic for drawer fronts), and this would be one project that it would actually be acceptable. Just add a lag screw to the front as a drawer pull.
You must be logged in to reply to this topic.