Germanys next MPCNC

This topic contains 2 replies, has 2 voices, and was last updated by  Timo 12 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #28469


    Hey Guys!
    This is my MPCNC

    Made with 25mm Stainless Steel. Printed in PLA.
    Cutting area is:

    X 1100mm
    Y 610mm
    Z 400mm

    The Spindle is a Kress 1050 FME-1 with 5000 to 25000 RPM

    Because of its size and the instability, a friend has designed me brackets, with which I fixed the mpcnc on the walls.
    This allows me to experience high speeds. There is no more shaking at rapid starts and brakes.

    You can find them here:

    I’ve been playing around for about 8 weeks now and have already worn a lot of bits.
    Meanwhile, I have at least understood how I have to work wood.
    Next, a box is built around the MPCNC to keep the dust in check.
    Then I’ll go to work with lasers 🙂

    Thanks Vicious1 for sharing your awesome build with us!



    Great build. That wall anchor is a good idea.

    What’s with the big Z? You can’t really carve that deep into wood without having really long bits, right? Am I missing something?



    No, the big Z is just for using my MPCNC as a 3D Printer.

    Although I have more fun at the moment on wood as on 3D printing 🙂

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.