gcode test

Tagged: ,

This topic contains 5 replies, has 2 voices, and was last updated by  Ryan 9 months, 3 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #53324

    shannonb1
    Participant

    Marlin 1.1 the test code i had to right click and choose save as…its a .gcode….the cnc doesnt see the file….it sees the folder and structures but not the file. please help

    #53325

    Ryan
    Keymaster

    I am unclear to what the problem is. Are you using an LCD or repetier host? My crown file?

    #53326

    shannonb1
    Participant

    your crown test file, i have to open the webpage where i see all the code, i save as .gcode file, i move the file to an sdcard and then put in my card reader in the lcd screen. the firmware i can cycle to the file and the gcode file does not appear.

    #53327

    Ryan
    Keymaster

    I think this is some sort of windows thing? I just right clicked the link, “save link as” and it works. There should be no structure, it is a text file. Try the attached.

    #53331

    shannonb1
    Participant

    success thanks!

    #53333

    Ryan
    Keymaster

    sweet

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.