From the Y axis a motor spontaneously runs slower

New Home Forum LowRider Troubleshooting – LowRider From the Y axis a motor spontaneously runs slower

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #98043
    Dennis
    Participant

    Everything worked perfectly with and after testing a drawing, the router gets stuck on the table, on one side.

    Now it seems as if an engine is running slower or gets less power.
    I have swapped the y axis plugs and it makes no difference.

    I looked at the forum but I can’t find my problem on it.

    #98050
    Dennis
    Participant

    After testing whether the engines run one by one.

    I come to the conclusion that the bolts are separate from the pulley.

    ashamed ashamed 🙂

    #98064
    Ryan
    Keymaster

    Don’t worry, that is a very very common mistake, I have had it happen way too often.

    #98113
    Dennis
    Participant

    Maybe it’s good that other people can read it now. That’s what I did for hahaha

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.