France/Europe router or Spindle ?

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC France/Europe router or Spindle ?

This topic contains 5 replies, has 5 voices, and was last updated by  Karel 10 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #31677


    Hi everyone. I may update my (non MP)(lightweight, highly elastic) CNC in the near future to replace the dremel I’m using at the moment to something that has more “punch”. I may buy either a router, or a 52mm 500w “chinese” spindle as seen on aliexpress.

    First, if I don’t plan to use the router for anything else that the CNC, do you advise I use a router ? or a spindle ? (what pros/cons ?)

    If I go with a router, since the dewalt 660 isn’t available in Europe, is there an other one that you advise touse ? Looks like a Makita 1709/1710 would do the rick, but it seems it has no speed control. Would that work ? Is it OK ?




    The 500 watt spindles are a good choice or a kress. If you can’t get either of those maybe someone on that side of the globe can chime in.



    Thanks !



    I can recommend the Kress.
    I have the 1050, but they come in a 800W version as well.

    Using this mount:


    Derek P

    There is a Makita clone called a Katsu that may work. I use the Makita RT0701C and it’s working well for me.



    I use the Kress 800 FME-Q. 800w, electronic speed control. Very nice to work with.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.