First Production Run

New Home Forum Things You Have Made First Production Run

This topic contains 3 replies, has 2 voices, and was last updated by  Ryan 3 weeks, 2 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #99959

    Tom
    Participant

    P1030568

    Stencils cut on MPCNC, Cheap 1/8″ single carbide bits. 10 for $10 eBay. Aluminum trim coil.

    1″ x 12″ pine board. Measures 11 1/4″ x 18 3/4″. Paint first, then carve.

    Burnt edges with propane torch and clear acrylic top coat.

    Carving done with 45∘ bit from V1.

    I should include a picture of all the scrap I’ve made in the process.

    P1030562
    P1030563
    P1030566

    • This topic was modified 1 month, 1 week ago by  Tom.
    • This topic was modified 1 month, 1 week ago by  Tom.
    • This topic was modified 1 month, 1 week ago by  Tom.
    3 users thanked author for this post.
    #99974

    Ryan
    Keymaster

    Nice, that is how you use a CNC!

    #101545

    Tom
    Participant

    Tool change success.Amazing detail for size.

    Carve 50mm x 77mm, White Oak Wood

    Tool 1) 1/8 single flute, 15mm/s, 2mm DOC.

    Tool 2) 1/8 45̊  V-bit 5% stepover, 10mm/s 1mm DOC.

    I colored it with Kiwi Brown shoe polish and buffed off the excess.

    Failures results /solutions:

    Windows 10 (Restart), Repetier-Host doesn’t clear cache (Restart), wiring (No Plugs allowed in moving connections).

    Old-Man

    • This reply was modified 3 weeks, 2 days ago by  Tom.
    • This reply was modified 3 weeks, 2 days ago by  Tom.
    Attachments:
    #101561

    Ryan
    Keymaster

    NICE!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.