First 2D contour with Fusion

New Home Forum Things You Have Made First 2D contour with Fusion

This topic contains 5 replies, has 4 voices, and was last updated by  Barry 2 weeks, 2 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #108318

    J
    Participant

    Hi all.  It’s not a work of high art or technical skill but I have me a Batman coat hook back plate for a treehouse. It’s my second cut with the machine (first was a plain circle haha)

    Thanks to Ryan for all the time and efforts for sharing this machine, it’s a lot of fun for a new user.  Next some tweaking and to get stuck into Fusion 360 – ears on this are not exactly right yet.  Have a good day to all

    Attachments:
    2 users thanked author for this post.
    #108320

    Tim
    Participant

    Hi all. It’s not a work of high art or technical skill but I have me a Batman coat hook back plate for a treehouse. It’s my second cut with the machine (first was a plain circle haha)

    Thanks to Ryan for all the time and efforts for sharing this machine, it’s a lot of fun for a new user. Next some tweaking and to get stuck into Fusion 360 – ears on this are not exactly right yet. Have a good day to all

    It appears you have the path direction reversed, so it is cutting on the inside of the line when it should be cutting on the outside. Note the direction of the arrow when you select the contour, if it does this you can click the arrow to reverse it.

    • This reply was modified 2 weeks, 4 days ago by  Tim.
    2 users thanked author for this post.
    Ryan, J
    #108343

    J
    Participant

    Oh my haha, I’d shake your hand in person, that’s exactly it, looking at the simulation closer.  One more thing learnt today.  Tim, you’re a gentleman, thanks for your help.  Cheers

    1 user thanked author for this post.
    Tim
    #108350

    TomW
    Participant

    Nice job! Keep it up. You’re going to do very well!

    #108352

    Tim
    Participant

    Oh my haha, I’d shake your hand in person, that’s exactly it, looking at the simulation closer. One more thing learnt today. Tim, you’re a gentleman, thanks for your help. Cheers

    My next suggestion was going to be simulation! Glad you already know about it. No sweat!

    #108473

    Barry
    Participant

    Hey J, look at getting some endmills.  The flat router bit will work, but endmills will work better.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.