Firmware

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by  Erwin Vigilia 2 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #105749

    adam57
    Participant

    Bonjour à tous

    Mon problème est quel firmware prendre avec une carte arduino + ramps 1.4.

    Toute ma machine est prête il me reste cet élément à choisir ainsi que les paramétrages à réaliser si vous avez des informations à ce sujet je suis intéressé

    Cordialement

    Hello everyone My problem is what firmware to take with an arduino card + 1.4 ramps. All my machine is ready I still have this item to choose and the settings to make if you have information about it I’m interested Regards

     

    #105822

    Erwin Vigilia
    Participant

    Hello and welcome!

    This question is better suited to the “Advice” or “Software” forum categories – “Troubleshooting” usually means you have already built the machine and are having problems.

    More information is needed to fully answer your question. Are you planning on dual endstops?  Ryan has a link to his github for various configurations here:

    https://www.v1engineering.com/marlin-firmware/

     

    1 user thanked author for this post.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.