Fingers crossed…Tom S is building one Probably

New Home Forum Updates Fingers crossed…Tom S is building one Probably

This topic contains 10 replies, has 9 voices, and was last updated by  Bill 2 weeks, 5 days ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #76348

    Ryan
    Keymaster

    Nervously awaiting the fallout, positive or negative…

    5 users thanked author for this post.
    #76349

    Geoffrey
    Participant

    Great news!!! I can’t wait to see how Tom’s machine looks and works!

    #76350

    Aaryn
    Participant

    Oh that’s cool!  He doesn’t sound extremely optimistic about the end product but I think he will be impressed.  It is a good design.

    I saw the 3D Printer he converted to a use a spindle.  The MPCNC doesn’t suffer from a lot of the same flaws he mentioned with that build.

    1 user thanked author for this post.
    #76351

    Ryan
    Keymaster

    He doesn’t sound extremely optimistic about the end product

    I’m banking on that. Under promise, over deliver. If I can still be surprised at my own machines capabilities, I am sure it can really knock your socks off if you don’t expect much.

    I just convinced my carpenter buddy a few days ago. He was of the “I can do it better by hand” mindset. We did a simple carving and now he has to have one!

    #76353

    Jeffeb3
    Participant

    Nice. I agree. Hopefully he thinks he’ll get a lump of coal, and when he spends the time on the CAM and actually makes some shiney parts with it, he’ll be too proud of his work to be anything but happy.

    #76362

    Barry
    Participant

    Hopefully he found the right sized nuts and bolts!

    #76365

    Dui, ni shuo de dui
    Participant

    Again, we don’t need his benediction to know it works well, the gallery is full of awesome projects being made with this machine and people using it everyday.

    I just hope he’ll give it a fair review, and that he’ll come to our awesome forum to get proper support, advices and love 🙂

    1 user thanked author for this post.
    #76366

    Jeffeb3
    Participant

    I just hope he’ll give it a fair review, and that he’ll come to our awesome forum to get proper support, advices and love 🙂

    Yeah, we could use his help troubleshooting too.

    1 user thanked author for this post.
    #76524

    Kelly D
    Participant

    That’s awesome Ryan! I bet the only thing he runs into is the “tighten this one, don’t tighten that one” bits but you have it all very well explained and documented. I wished and wished that there was s similarly comprehensive set of instructions for the MP3DP but when all was said and done was happy that there wasn’t as I got to “know” a lot of very kind and helpful (and supportive and persistent) people on the forum. You have no idea how many gateways the MPCNC and MP3DP have opened up in my world. Even the knowledge I’ve gained about things like Arduino which prior to the MPCNC I knew existed but knew nothing about. So many places I’m going to go with just that thread of knowledge growing.

    V1 Engineering has changed my life!

    3 users thanked author for this post.
    #76738

    Guffy
    Participant

    1 user thanked author for this post.
    #76830

    Bill
    Participant

    Love the build, but couldn’t understand a word he said. 🙂

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.