Estlcam with multiple dxf's

New Home Forum Random or Off Topic Estlcam with multiple dxf's

This topic contains 4 replies, has 5 voices, and was last updated by  Barry 9 months, 3 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #32914


    Is there a way to import multiple dad’s into estlcam to be cut as one? For example, if I have a dxf of a tree and one of a bear, can I import both or must I use a separate program to join them and save as a single did before I do so? Also, let’s say I want to cut that out now. Is there a good program to edit dxf files? Something where I can add font, or add an outline to cut out a pattern at a specific place?



    Just use
    File > Insert




    libreCAD is a good choice, IMO. OnShape can do it to, but you have to Wade through a bunch of 3d features to find what you want. You can basically import dxf files into a sketch, then edit it, and then export the sketch as a dxf.

    The only problem I’ve had with libreCAD is the “components” don’t work right in EstlCAM, but you can select everything and explode the components right before saving. I usually have a different file with the exploded components.



    I’d also like to hear if there is a way to insert multiple DXF files into one screen on Estlcam for toolpath setup. (I tried inserting as suggested but can only get one file in at a time)



    File Insert works for me. Just opened 3 different dxf files on one screen.

    1 user thanked author for this post.
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.