Estlcam questions

New Home Forum Updates Estlcam questions

This topic contains 3 replies, has 3 voices, and was last updated by  Dave 1 year, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #49749

    Dave
    Participant

    I am using Estlcam to generate my gcode.  I will generate some code from a simple part and go to run it. It starts and then just seems to hangup.  I then checked the code in a text editor and noticed that the G01 portion of the code was missing from a majority of the lines.  Just to check, I added the G01 command to the lines that didn’t have it and then ran it.  It worked and I cut the part.  Am I missing something.  I thought that every line of code needed a command.  Any help would be appreciated.

     

    Thanks

    #49751

    Ryan
    Keymaster

    That is the first I have heard of that issue. I would uninstall and reinstall, and stick with version 10. Make sure you set up the rapids as well.

    1 user thanked author for this post.
    #49774

    Jeffeb3
    Participant

    You can choose what command gets used, maybe you deleted the “G01” somehow?

    You are correct that every line needs a command.

    1 user thanked author for this post.
    #49823

    Dave
    Participant

    Thanks for the input Ryan and Jeff.  I re-installed Estlcam and it is working now.

    Onward and upward.

     

    Dave

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.