Endstops

Tagged: 

This topic contains 3 replies, has 3 voices, and was last updated by  Manolo Suarez 2 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #104586

    Manolo Suarez
    Participant

    Hello probably I am missing something here but why there is Endstops only in one side of the rails? Should have in both isn’t it?

    #104587

    Jamie
    Participant

    Endstops are used for determining “home” position and not for preventing motion beyond the working area.

    It is possible to use endstops to limit the motion but this is not the usual configuration, and it requires a firmware change to implement this.

    1 user thanked author for this post.
    #104588

    Barry
    Participant

    You can run it with just one on each end, but you’d probably need physical hard stops on the other side.

    1 user thanked author for this post.
    #105329

    Manolo Suarez
    Participant

    Thank to all, nice to know.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.