Dust Collection

New Home Forum LowRider Advice – LowRider Dust Collection

This topic contains 4 replies, has 3 voices, and was last updated by  Ryan James 3 days, 11 hours ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #120312

    Ryan James
    Participant

    I cannot find any info for the dust collection on the LowRider 2.  What size hose/pipe connection to the dust collection port?  My shopvac hose hard end doesn’t fit.  1 1/2″ PVC doesn’t fit.  Not sure how to get this connected so I can stop the MDF snowfall in my shop.

    #120347

    Brent
    Participant

    Dust collection is important for sure to keep the mess down.  I ended up 3d printing out an adapter to go some vacuum hose I had left over.  It’s an easy solution I’ve found to the incessant challenge of hose fitment and adapters.

     

     

     

    • This reply was modified 1 week, 4 days ago by  Brent.
    #120381

    Ryan James
    Participant

    Nice.  That’s what I was figuring I would need to do.  Would you be willing to share that adapter file?

    #120624

    Ryan
    Keymaster

    1 1/4″ hose. If you use an adapter keep it as short as possible.

    • This reply was modified 1 week, 2 days ago by  Ryan.
    #121478

    Ryan James
    Participant

    1 1/4″ hose. If you use an adapter keep it as short as possible.

    That makes a lot more sense as I think about it.  End of the shop vac hose is solid and designed to go into another piece.  I’ll have to find some 1-1/4″ hose.  I really want it to connect to my 2″ dust collection.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.