Duet wifi

This topic contains 6 replies, has 6 voices, and was last updated by  Barry 3 months, 2 weeks ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #80693

    Svein Inge Kallevik
    Participant

    is there anyone that has used a duet card in the mpcnc? I have a card but i do not know how to start to get it in the machine.

    #85937

    I like the 7″ display for duet. Hopefully someone comes up with a setup for MPCNC….

    1 user thanked author for this post.
    #91384

    MarkM
    Participant

    I’m doing one right now. Still assembling the mechanicals. I have 3 duet boards (two 3d printers).

    1 user thanked author for this post.
    #94066

    Chase Johannsen
    Participant

    Interested in this as well as I have a duet board and the LCD display.

    #95125

    voglster
    Participant

    I’m a couple of days out testing a duet with this.  Will let you know my results.

    #95212

    MarkM
    Participant

    I’m a few hours work away from starting some movement experiments. Looking for a solution for attaching the stepper wires to the drag chain cables at the stepper. Probably a printed affair that clamps to the stepper.

    #95297

    Barry
    Participant

    I’m a few hours work away from starting some movement experiments. Looking for a solution for attaching the stepper wires to the drag chain cables at the stepper. Probably a printed affair that clamps to the stepper.

    Use the bearing bolts.  Little more sturdy.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.