Design on door for a cabinet

New Home Forum Things You Have Made Design on door for a cabinet

This topic contains 9 replies, has 8 voices, and was last updated by  Bill 1 week, 6 days ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #108540

    Viktor
    Participant

    Wanted to add a cool pattern to a cabinet door that will sit on a cabinet hiding our internet router and fuse box. Unfortunately I made my MPCNC to small for this project so I had to settle for a design that did not cover the entire door.

    Used a carbide V-groove bit at 4 mm DOC in MDF that will make up the door.

     

     

    5 users thanked author for this post.
    #108548

    Turbinbjorn
    Participant

    Looks very good!

    1 user thanked author for this post.
    #108613

    TomW
    Participant

    Great idea, nice design, and excellent execution.

    Thanks for passing this along.

     

    1 user thanked author for this post.
    #108660

    Ryan
    Keymaster

    Really nice. There are some tricks to going bigger than your table but, I really like how that come out!

    1 user thanked author for this post.
    #108724

    Kenny Carnes
    Participant

    Very nice!

    1 user thanked author for this post.
    #108740

    Bill Vance
    Participant

    Ryan,

    Do you have a link for tricks to working on something larger than the original cutting area?  I’m trying to figure out the best way to do just that.

    Thanks

    1 user thanked author for this post.
    #108837

    Ryan
    Keymaster

    You can use positioning pins, or a stop block and work from all sides depending on accuracy needed. Those would be the most relevant for this type of thing, I think.

    Pins are pretty straight forward. I think David made a 9′ ruler or something like that with 3-4 repositions.

    2 users thanked author for this post.
    #108963

    Viktor
    Participant

    Thank you guys for the feedback!

    Ryan, the pins is a great idea and I will try it in the future if I have the need.

    Here is an update with the finished product, painted and mounted on the wall.

     

    WhatsApp-Image-2019-08-08-at-18.30.41

    1 user thanked author for this post.
    #108968

    Jeffeb3
    Participant

    I can’t tell if that’s from the future or the past, but I want to live there.

    1 user thanked author for this post.
    #108995

    Bill
    Participant

    Really nice!

    1 user thanked author for this post.
Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.