Dedicated Laser Re-Mix based partially on MP_CNC

New Home Forum Mostly Printed CNC – MPCNC Hardware Development – MPCNC Dedicated Laser Re-Mix based partially on MP_CNC

Tagged: ,

This topic contains 1 reply, has 1 voice, and was last updated by  Nick 9 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #53357

    Nick
    Participant


    This is the 3D rendering of the machine

    Hi all I am getting ready to post a new machine to Thingiverse. This is not a multi purpose machine but rather it is a dedicated diode Laser cutter. The gantry system y Axis is based on the FRoller from MPCNC  as are the corner blocks. However this is a hybrid with the Y being conduit and the X axis is 8mm rod. Much like the MPCNC this machine is only limited by the length of rod and conduit that you choose.

    Here is a close up of the laser head

    I plan on posting more details when I put this design up on ThingiVerse.

    Enjoy

    Attachments:
    #53359

    Nick
    Participant

    Not sure what happened here is the laser head

    Attachments:
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.