Construccion desde Argentina

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC Construccion desde Argentina

This topic contains 2 replies, has 2 voices, and was last updated by  Dario 3 weeks, 6 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #115010

    Dario
    Participant

    Hola mis nombres es Darío y sé yo ocurrió en incurcionar en este tema del mpcnc, estoy imprimiendo las piezas del mismo la idea es hacerlo de una medida de 2000 mm x 1300 mm con caños estructurales de 1 “de 3,2 de algún algún consejo que me puedan dar sera bien recibido pronto subire las foto del progreso gracias !!!

    • This topic was modified 3 weeks, 6 days ago by  Dario.
    1 user thanked author for this post.
    #115014

    Jeffeb3
    Participant

    That is pretty big for an MPCNC. The Low Rider would be a better fit.

    The 25.4mm is the outer diameter of the tubing. Make sure you can buy that before going too far, in case you can only find 25.4mm tubing.

    #115015

    Dario
    Participant

    Hola si aca en mi pais son los mas comunes esa medida gracias

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.