CNCjs

Tagged: 

This topic contains 6 replies, has 2 voices, and was last updated by  Dennis 3 months, 3 weeks ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #98112

    Todd
    Participant

    Playing with CNCjs and can’t seem to get zeroing out to work….anyone else have this?  I get the pen (don’t have a router yet) to the location and they try to zero out and I see this in the console.

    echo:Unknown command: “G10 L20 P1 Y0”

     

    I’m using a rambo 1.3 with the latest firmware from V1

    #98141

    Todd
    Participant

    Looks like I just need to use the console and use the G92 command to do what I need.

    #98144

    Dennis
    Participant

    Hi someone wants to help me install cncjs on a pi 3b. At the moment I have tried it 6 times but I get error messages all the time.

    It has since become a mix of different forms. I reinstall pi and hope to get help from you.
    Thank you

    I install pi light and can go to my mac via the terminal. the wifi connection works well.
    here it goes wrong somewhere

    [email protected]:~ $ sudo npm install [email protected] -g
    sudo: npm: command not found
    [email protected]:~ $ sudo npm install -g [email protected] –unsafe-perm
    sudo: npm: command not found
    [email protected]:~ $ sudo npm install [email protected] -g
    sudo: npm: command not found
    [email protected]:~ $ sudo apt-get install npm
    Reading package lists… Done
    Building dependency tree
    Reading state information… Done
    The following additional packages will be installed:
    gyp javascript-common libjs-inherits libjs-jquery libjs-node-uuid libjs-underscore
    libssl-dev libssl-doc libuv1-dev node-abbrev node-ansi node-ansi-color-table
    node-archy node-async node-balanced-match node-block-stream node-brace-expansion
    node-builtin-modules node-combined-stream node-concat-map node-cookie-jar
    node-delayed-stream node-forever-agent node-form-data node-fs.realpath
    node-fstream node-fstream-ignore node-github-url-from-git node-glob
    node-graceful-fs node-gyp node-hosted-git-info node-inflight node-inherits
    node-ini node-is-builtin-module node-isexe node-json-stringify-safe node-lockfile
    node-lru-cache node-mime node-minimatch node-mkdirp node-mute-stream
    node-node-uuid node-nopt node-normalize-package-data node-npmlog node-once
    node-osenv node-path-is-absolute node-pseudomap node-qs node-read
    node-read-package-json node-request node-retry node-rimraf node-semver node-sha
    node-slide node-spdx-correct node-spdx-expression-parse node-spdx-license-ids
    node-tar node-tunnel-agent node-underscore node-validate-npm-package-license
    node-which node-wrappy node-yallist nodejs-dev python-pkg-resources
    Suggested packages: ………………………………….etz

    #98145

    Todd
    Participant

    I would just use the image….I was up and going in 5 mins.

     

    https://www.v1engineering.com/dip-a-toe-in-the-pool-v1pi/

     

    1 user thanked author for this post.
    #98218

    Dennis
    Participant

    Thank you, Todd. I hadn’t seen it correctly. my english is not very good.
    I’m going to work with it.
    Thank you

    #98221

    Dennis
    Participant

    I can’t connect

    have I made the right WiFi setup like this?

    ## WPA/WPA2 secured
    #network={
    # ssid=”TP-LINK_2A2CE4″
    # psk=”02951722″
    #}

    country=NL

    ## Open/unsecured
    #network={
    # ssid=”put SSID here”
    # key_mgmt=NONE
    #}

    #98225

    Dennis
    Participant

    I use a rambo mini and with cnc js I cannot set a zero. feeder> G10 L20 P1 X0
    echo: Unknown command: “G10 L20 P1 X0”
    OK
    >

     

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.