ceramic printing

This topic contains 3 replies, has 4 voices, and was last updated by  Ryan 1 year, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #65327

    Fred Walter
    Participant

    Who here is using their MP3DP for ceramic printing?

     

    What ceramic printhead are you using?

    Is it open source?

    On thingiverse?

    Or https://www.stoneflower3d.com/opensource/ ?

    Or ?

    #65349

    Jeffeb3
    Participant

    You’re saying I could make a 3D printed coffee mug? Yes, please!

    #65355

    Aaron
    Participant

    We’re working on fitting a clay extruder to a cbeam minimill, mostly because the Z axis is stationary, and the bed moves in X and Y. There’s a lot of weight in a clay extruder.

     

    Coiling clay would be the original fused deposition modeling I suppose!

    #65365

    Ryan
    Keymaster

    My friend’s mom taught us ceramics as kids. Coiling and all. I showed her the first ceramics pictures from the gallery a while back. After that she has never looked at my machine the same! I think the only thing I ever fired was a monster of a coffee cup for my pops, poor guy actually used it. The lip must have been at least an inch thick. The things parents do for their kids…

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.