Cable Management

New Home Forum LowRider Advice – LowRider Cable Management

This topic contains 2 replies, has 3 voices, and was last updated by  Barry 4 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #63565

    Kyle Wiehe
    Participant

    Hi all!  I just finished putting together my lowrider build, and everything seems to be working well so far!  The first question I have regards cable management, specifically for the X axis.  Since I need ~5′ of cable (for both the motor and router) to get to the side of the table opposite the controller, what’s the best way to manage said 5′ of cables? Obviously, something like cable chains would work, but I wanted to see if anyone has any other suggestions.  Thanks!

    #63569

    Ryan
    Keymaster

    I just had mine connected near my vacuum at the center of the table, underneath it.

    #63589

    Barry
    Participant

    Mine hang from above.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.