Another West Virginia Low Rider

New Home Forum LowRider Your Builds – LowRider Another West Virginia Low Rider

This topic contains 11 replies, has 6 voices, and was last updated by  Ryan 2 months, 3 weeks ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #65034

    Brian Bunner
    Participant

    I have been hanging back for a while reading and building.  Finally getting around to sharing.  Also should mention that I am currently printing parts for the Low Rider update.  I started this build in in April and have been having a good time with it since.  Went cheap on a few things.  Used mild steel tubing from a local performance and race shop.  Also using the harbor freight trim router.

    This is my lowrider album.

    https://photos.app.goo.gl/8YIrwMaxUdCj7CCA2

    4 users thanked author for this post.
    #65037

    Barry
    Participant

    Man, that’s all really nice!  Digging the mirror, and the emoji!   😆

    #65064

    Ryan
    Keymaster

    WHOA! No more hanging back from you! Nice work, I need to add some of that to the gallery for sure.

    #65068

    Jeffeb3
    Participant

    Great work. I like the bassinet/crib.

    #65291

    Brandon
    Participant

    Nice work!

    Where did you find the poop emoji file?

    #68988

    mulze32
    Participant

    For the text signs are you just using an end mill or v-bit?

    #68992

    Brian Bunner
    Participant

    mulze, I used a 90 degree 1/8″ bit for those signs.

    http://a.co/d/eYVBDZC

    1 user thanked author for this post.
    #68998

    mulze32
    Participant

    mulze, I used a 90 degree 1/8″ bit for those signs.

    http://a.co/d/eYVBDZC

    Thanks. So for exampble, the Bowman or Lillie sign or the mirrors in the last photo used that bit to cut out the text?

    #69119

    Brian Bunner
    Participant

    Sorry for my confusion. I used the V bit on the engraved signs.   The flat signs, like the “Lillie” sign, were cut using a straight flute endmill like this: http://a.co/d/dwID2w1

     

     

    1 user thanked author for this post.
    #69125

    mulze32
    Participant

    Great thanks very much for the reply!

    #69857

    Brian Bunner
    Participant

    I shared this a while back via google photos, thought I would share here as well in case someone else wanted to make a poop.

     

    https://drive.google.com/open?id=14SP0cbN6YZDERwMYrTCBz5sC5IuJpLiK

    2 users thanked author for this post.
    #69869

    Ryan
    Keymaster

    in case someone else wanted to make a poop.

    I had coffee, thanks though.

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.