Another Aussie Build

New Home Forum LowRider Your Builds – LowRider Another Aussie Build

This topic contains 3 replies, has 3 voices, and was last updated by  Tim 4 weeks, 1 day ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #106828

    Tim
    Participant

    Another aussie build.

    It’s taken so long it’s a version 1!  But it’s now running.

    Used a local Ozito Router cause it’s cheap and 3d printed a mount for it.

    Pic’s to prove it’s real 😉

    IMG_1329
    IMG_1421

    1 user thanked author for this post.
    #106837

    Jeffeb3
    Participant

    Nice! Mine is V1 too. I see my vacumn attachment in there. I was thinking of routing some channels on the bottom to connect that hole to the router’s. It has stuck to the table on me once or twice.

    1 user thanked author for this post.
    Tim
    #106866

    Ryan
    Keymaster

    Once you have a CNC all the rest of the versions are easier and quicker to transition to when you’re ready. Glad you built it either way!

    • This reply was modified 4 weeks, 1 day ago by  Ryan.
    1 user thanked author for this post.
    Tim
    #106911

    Tim
    Participant

    Thanks.   Good idea.  It hasn’t stuck yet….

    I was thinking of redoing the mount to include the vacuum as per the Version 2 but in the meantime some channels would be good.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.