Alternative to Nema 17 Steppers from Amazon

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Alternative to Nema 17 Steppers from Amazon

Tagged: , ,

This topic contains 0 replies, has 1 voice, and was last updated by  Adnan 1 year ago.

Viewing 1 post (of 1 total)
  • Author
  • #27896


    I’m currently building my first MPCNC build and I only lack the Nema 17 steppers. Sadly, stepperonline (amazon) doesn’t ship to where I live. I found some alternative Nema 17s, but I’m not sure if they would work. I’ll be doing (mainly) aluminum and wood milling. I’d be grateful if someone could tell me which stepper is better for the project.
    Stepper 1:
    Size: 42.3 mm square × 38 mm, not including the shaft (NEMA 17)
    Weight: 285 g (10 oz)
    Shaft diameter: 5 mm “D”
    Steps per revolution: 200
    Step Angle: 1.8°
    Current rating: 1.68 A per coil
    Voltage rating: 2.8 V
    Resistance: 1.65 Ω per coil
    Holding torque: 3.7 kg-cm (51 oz-in)
    Inductance: 3.2 mH per coil
    Lead length: 30 cm (12″)
    Output shaft supported by two ball bearings
    Stepper 2:
    Size: 42 x 42 x 47 mm
    Current rating: 1.5A per coil
    Voltage rating: 24V
    Resistance: 1.6 Ω per coil
    Holding torque: Max. 0.55 N.m
    Inductance:2.8 MH per coil
    Step Angle: 1.8°
    200 steps/revolution
    P.S.: I got the detailed specs for the second stepper from:
    (The site is in Turkish.)

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.