Actual width of 611_plate_2?

New Home Forum LowRider Advice – LowRider Actual width of 611_plate_2?

This topic contains 3 replies, has 3 voices, and was last updated by  Barry 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #109991

    Duncan Meyer
    Participant

    Hi,

    Can someone confirm the measured width (in mm) of flat part 611_plate_2 for me?  Thanks.

    Cheers
    Duncan

     

    #110053

    Ryan
    Keymaster

    The last FAQ has a tool to get exact measurements from the DXF’s.

     

    If you just want a rough number let me know and I will put a tape on it when I get back into the shop (it’s hot here…hanging in the A/C).

    #110063

    Duncan Meyer
    Participant

    Hi guys,

    I’m at work and can’t download anything.  My CAD program says it is 230mm wide.  Is this right?  I have a local cnc shop which has queried this.  If 230mm is correct I’ll just tell him to go ahead and cut them.

    Cheers

    Duncan

    #110137

    Barry
    Participant

    Yep, that’s the longest side.

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.