A small jewelry box

New Home Forum Things You Have Made A small jewelry box

This topic contains 3 replies, has 3 voices, and was last updated by  Ryan 2 years, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #36771

    Pinhas Gold

    Here are 3 pictures of a small jewelry box made as gift.
    It consists of three parts. Base and cover are identical, the mid part is glued to the base.
    Also, both side of mid part are the same and had some work around for the best way to route these both side equally.
    Wood types are Poplar and Sapelli (Mahogany like)
    Dimension (in mm):
    95 X 65 X 48



    Oh goodness, that is excellent. I need to go buy a watch so I can make a watch box for it like this. Thanks for sharing it.



    @Ryan, you could make one for your calipers.



    Ohhhhh, that would level up my nerd credit for sure. I do have a caliper tattoo that is about 10″…so some might think I have a fetish…

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.