A Low Rider in Italy

New Home Forum LowRider Your Builds – LowRider A Low Rider in Italy

This topic contains 8 replies, has 5 voices, and was last updated by  Matteo 2 years, 1 month ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #39696

    Matteo
    Participant

    Hi guys,

    I have problem to found the tubes, I’v bought it from uk but they send me the 25.00×1.5 ๐Ÿ™

    Now i found another seller who can ship me the 25.4 but polished, it can be ok?

    Or is best to use the 25.00? Someone have used it?

    #39711

    Ryan
    Keymaster

    Polished should be fine. The right size is most important.

    #42257

    Matteo
    Participant

    Hi guys,

    https://youtu.be/Itz1fT6gvRM

    The LowRider is alive! ๐Ÿ™‚

    Thank you Ryan!

     

    #42268

    Ryan
    Keymaster

    Heck yeah!!!

    #42275

    Russ Heffner
    Participant

    There is a company called McMaster Carr they have the tube you need. I do not know how much it would cost to ship to you though.

    RussH

    #42276

    Russ Heffner
    Participant

    My LCD screen went blank. I can still operate with Repetier though.

    Any suggestions what may be the issue with LCD?

    RussH

    #42278

    Kevin Lopez
    Participant

    Well if it is anything like mine, either your 5v regulator died or your plugs are reversed. If the screen only lights on when its plugged in usb, then its the 5v that’s gone. If it just doesn’t show anything regardless, check the plugs

    #43270

    Lars
    Participant

    Where did you get your tubes? Here in Norway I cant seem to find any 25.4mm locally. I finished my table and 3d printed parts a couple* of weeks ago, but still missing them tubes. Been keeping one eye open for them for a good long while now, but I think I actually have to order from somewhere that can send them to me.

     

    *more than a couple

    #43384

    Matteo
    Participant

    I found it only in uk

    Take a look on ebay Lars, request specifically 25.4 someone have in stock the 25

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.