3.5 watt TTL paser working on 52×82 Lowrider2

New Home Forum LowRider Your Builds – LowRider 3.5 watt TTL paser working on 52×82 Lowrider2

This topic contains 2 replies, has 3 voices, and was last updated by  Ryan 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #106256

    David
    Participant

    I edit the firmware on my 52×82 Lowrider2. And now have TTL control of a Eleksmaker 3.5 watt laser. 20190716_103803
    20190716_104403
    20190716_103300
    20190715_180425

    3 users thanked author for this post.
    #106279

    Kenny
    Participant

    Great. I think you may be one of the first to do this with one of the RAMBOs, or at least post about it. Did you remap one of the fan pins to a different gcode command, or is the fan control code changed in your gcode program for lasering?

    #106342

    Ryan
    Keymaster

    The pin is shown on the ultimachine page and the laser page explains the options for control.

     

    David I can;t wait to see what you are burning with that new giant build!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.