July 28, 2018 at 6:28 am #64856
Really excited to show off my latest project! This has taken multiple attempts… 4 to be exact… just to get this far. I have one more finishing pass that I’ll be able to complete on Monday and then I’ll cut it out and put it in a 3D printed frame. I’m super impressed with everything and I’ll update this thread when it’s completely done.
I’ve got about 4 hours in cut time in the project, and I really NEED to go back through the machine and get rid of some slop. I’m sure I could cut much faster if it weren’t for the slop and my lack of exact perpendicularity.
-AlexJuly 28, 2018 at 6:30 am #64857
That looks amazing. Great work. Thank you for sharing.July 28, 2018 at 8:58 am #64862
That looks awesome. I will wait to add it to the gallery for the finishing pass and frame? The cuts looks pretty dang good to me but it you can tweak it some more, go for it.July 28, 2018 at 1:57 pm #64895
Yeah, we’ll see if I don’t screw it up!
-AlexJuly 28, 2018 at 5:49 pm #64914
I’m getting ready to make the leap from simpler engraving to 2.5D carving. Do you have any first-hand pointers? Bits, speed, etc…July 29, 2018 at 3:53 pm #65018
Are you using F360? Which board are you using? How big is your setup?
Let’s start from there and I’ll let you know what I’ve learned thus far.
-AlexJuly 30, 2018 at 4:45 pm #65111July 30, 2018 at 6:12 pm #65123
Wowzers that is really really nice. Congratulations.July 30, 2018 at 6:42 pm #65133
Winter is coming.August 2, 2018 at 1:52 pm #65418
Go ahead and use that picture for the gallery. Project priorities have changed a bit and I probably wont get around to printing the frame any time soon!
-AlexAugust 2, 2018 at 5:00 pm #65439
You must be logged in to reply to this topic.