Reply To: Chatter cutting 4mm plywood

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Chatter cutting 4mm plywood Reply To: Chatter cutting 4mm plywood

#39255

Azza
Participant

I’ll see what I’ve configured in marlin and adjust the setting in ESTLcam.
Do you think that the slower plunge rate will fix the Z-axis issue I observed?
I have a geared stepper one of NEMA 17 – 5.x ratio ones – that would provide more torque but possibly break the cutter?
Kind of goes against what your saying.