Reply To: Stepper Motor Heat



Roger that. Thanks. I opened up the box with the JP382A board and there are no dip switches; it looks like the thing is set to go full power all the time. So, that won’t work here. The motors are far too warm. I have a different controller here that does have switches an I can drop it down to 25% so I’ll check that out this evening I hope. If that still runs too hot I’ll buy your Ramps set up and go from there. It’s all a learning experience, that’s the whole point of all this. If I order the set up from you this evening could it be here by the weekend? I’m in Maryland.