Reply To: 100W Co2 laser MPCNC

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC 100W Co2 laser MPCNC Reply To: 100W Co2 laser MPCNC



For prints of this size I would use a bigger nozzle, not only for time, but for strength too, a 0.6mm nozzle will output 4x amount of plastic compared to a 0.4mm nozzle, translated it means a 0.6mm nozzle with 0.36 layerheight would print the 32hr print in 8 hrs, with a small reduction of detail but a much stronger part.