Reply To: DRV8825 terrible at microstepping!?

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC DRV8825 terrible at microstepping!? Reply To: DRV8825 terrible at microstepping!?

#17127

Karl Hagström
Participant

Thanks for quick reply!
Isn’t 200 steps per mm based on 1/32? at least the calculator changes to 6.25 steps per mm if full step is chosen, and that would lead to an error of 1/12.5 mm which is still only 0.08 mm =)
/Kalle