Firmware

Firmware

If you bought a bundle or electronics board from this site, this is already done.   Firmware Firmware is the program or software “embedded/burned” into the electronics board, this is what translates the gcode into motion in the stepper motors.  ...
The LowRider2 CNC

The LowRider2 CNC

The LowRider2 CNC This is my revised version of a CNC router that can handle full sheet material! Of course you can go smaller. If the MPCNC is not big enough for you this picks up where that left off. Both versions are now live, links on the main pages....
New foot.

New foot.

It is finally here, two years later, a new foot. Why, this one is better. Why is it better, more rigid and easy to adjust. Use some number 6 or equivalent screws and washers to hold them down. There are slotted and oversized holes so you can move them around to get...
Auto Square, Dual EndStops

Auto Square, Dual EndStops

Basics The Dual EndStop firmware update enables unprecedented precision more easily than ever before. Since day one I have never encouraged endstops be used, until now. The Mostly Printed CNC and LowRider CNC are unique in the fact that two of the axes are powered at...
Laser Engraving Mirrors

Laser Engraving Mirrors

Choosing an Image Grey scale images do not translate well on to mirrors because either the surface is reflective or it is not. So straight 2 color images with no gradients are best. Just plain old black and white. The higher the resolution the sharper the edges....